Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Miramar, FL
Chimney inspection in Miramar is mostly a moisture and wildlife story, not a creosote story. Most of the fireplaces we look at here get used a handful of nights a year, so the real damage happens while they sit idle through humid summers and hurricane-season rain. That changes what we check: stucco crowns, flashing and flue caps first, then the firebox and damper. If you’re not sure what shape yours is in, call us at (866) 942-9444 and we’ll book an inspection. Our technicians have up to 11 years of experience, and we’ll show you what we find before anything else happens.
Why Miramar Homes Are Different
Miramar is a South Florida suburb with essentially no heating climate. That one fact reframes the whole trade here. Chimneys in this city are almost all attached to wood-burning fireplaces or built as outdoor masonry and stone structures, and the enemy is year-round humidity plus wind-driven rain during hurricane season, not heavy winter burning. Most fireplaces here light up a few nights each winter and then sit untouched for months.
The housing stock shapes the work too. Miramar is dominated by 1990s and 2000s Mediterranean-style stucco tract homes in master-planned communities, with older pockets near the historic east side. Those chimneys are typically stucco-clad block or framed with manufactured fireboxes rather than century-old brick. That means crown, flashing and stucco integrity matter far more than tuckpointing. Intense UV and constant humidity break down the same stucco that keeps rainwater out, and warm winters let birds, squirrels and debris colonize flues between infrequent uses. We routinely find nests in Miramar flues that haven’t been lit in a year.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Miramar Services
Two calls come in more than any other from Miramar homeowners: a sweep before the first burn of the season, and a repair when something on the exterior has failed.
Chimney Sweep in Miramar
Our Chimney Sweep in Miramar service removes creosote, soot, nests and leaf debris from the flue and firebox, then vacuums the surrounding area so nothing ends up on your floor. In a mild-climate city like Miramar, the sweep also clears the animal blockages that build up during the idle months. We check the damper and firebox while we’re in there, because a flue that sat unused through a humid summer tells us a lot about what else needs attention.

Chimney Repair in Miramar
Repair work here centers on the exterior. Cracked stucco crowns, failed flashing and loose caps let rain into the chimney structure, and once moisture gets behind the stucco it keeps working inward. Our Chimney Repair in Miramar service addresses that damage directly, from crown rebuilding to flue relining when a flue has cracked or deteriorated. We use HeatShield ceramic resurfacing on flues that can be restored rather than torn out, and we explain the options before anything is scheduled.

Chimney Inspection in Miramar
Chimney inspection in Miramar is the service that catches problems before they get expensive. With stucco-clad chimneys from the 1990s and 2000s sitting through years of humidity, UV and driving rain, the failures we see are exterior and moisture-related far more often than creosote-related. Our Chimney Inspection work is built around that reality, and we document what we find with photos so you can see it yourself.
An inspection here is a look at the whole assembly, not just a flashlight down the flue. That means the crown and its stucco coat, the flashing where chimney meets roof, the cap, the firebox and damper, and the interior flue walls. Because most Miramar fireplaces get used so rarely, problems hide between uses. A flue that hasn’t been lit in a year can be home to a bird or squirrel nest, and a hairline crack in a stucco crown can let in water for months before you notice a stain on the ceiling inside. An inspection finds those things early. We also use it to flag any safety or code issue before it turns into structural damage or a fire hazard, and to tell you plainly when work can safely wait.
Fireplace Inspection
Signs you need it
You’re about to light the fireplace for the first time after summer, or you’ve noticed a musty smell, smoke coming into the room, or a damper that won’t open smoothly.
What it costs in Miramar
A fireplace and basic inspection typically runs around $99 to $249 depending on how much of the assembly needs to be checked.
How we do it
We examine the firebox, damper, smoke chamber and firebrick, check that airflow is unobstructed, then photograph anything of concern and walk you through it in plain language.
Chimney Flue Inspection
Signs you need it
You’ve had a nest, a chimney fire, or visible flue damage before, or your appliance draft has felt weak compared to previous years.
What it costs in Miramar
Flue inspection with a camera typically falls between $149 and $399, and a Level 2 assessment with video imaging runs about $199 to $499.
How we do it
We run a camera the length of the flue, checking for cracks, gaps, obstructions and deteriorated lining, then record what we find on video for you to review.
What Chimney Inspection Costs in Miramar
Prices depend on the level of inspection and how much of the chimney has to be examined. These are typical ranges, not quotes.
| Item | Typical range in Miramar |
|---|---|
| Basic fireplace and chimney inspection | $99 – $249 |
| Level 2 inspection with camera and video | $199 – $499 |
| Full flue and structural assessment | $249 – $699 |
The written estimate we send after the visit is what sets your final price, not these ranges.
Does Miramar’s humidity make chimney inspections more important?
Yes. High humidity and hurricane-season rain break down stucco crowns and flashings, and problems hide for months between rare fires. An inspection catches moisture damage and blockages early. Call (866) 942-9444 for an exact quote – estimates are free.
Can a flue get blocked if we hardly ever use the fireplace?
Often, yes. Warm winters mean flues sit idle long enough for birds, squirrels and debris to move in. A camera check during inspection finds the blockage before you light a fire. Call (866) 942-9444 to schedule.
Brands We Service in Miramar
We work with professional-grade chimney brands: HeatShield for flue resurfacing, DuraFlex and Olympia Chimney for relining, and Gelco and Famco for caps and venting. We don’t claim to keep stock on hand; materials are sourced for the actual job. Turnaround depends on that sourcing, and we’ll tell you the timing up front. You can see the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Miramar, FL
Every number below is a typical range, not a fixed price. Your written estimate sets the final figure.
| Service | Typical range in Miramar |
|---|---|
| Chimney sweep and cleaning | $129 – $349 |
| Basic fireplace and chimney inspection | $99 – $249 |
| Level 2 inspection with camera and video | $199 – $499 |
| Full flue and structural assessment | $249 – $699 |
| Crown and stucco repair | $399 – $1,499 |
| Flashing and leak repair | $349 – $899 |
| Chimney cap installation | $299 – $649 |
| HeatShield flue resurfacing | $899 – $2,499 |
| DuraFlex or Olympia Chimney relining | $1,499 – $4,299 |
Two things push price up in Miramar more than anywhere else: how much stucco and flashing work a crown needs after years of sun and rain, and how much of the flue can be restored versus relined. We give you the number in writing before we book, so the price you agree to is the price you pay.
Neighborhoods We Serve in Miramar
We work across Miramar, from the master-planned communities out toward the eastern historic pockets. The mix of 1990s and 2000s stucco tract homes and older construction means we see both moisture-driven crown and flashing repairs and older flue lining issues on the same day. Wherever you are in the city, book through the phone line and we’ll confirm the job in one call.
- Miramar Parkway corridor
- Pembroke Road area
- Historic east side neighborhoods
- Miramar Ranch and surrounding communities
- Flamingo Road corridor
Service Area – Cities Near Miramar
Miramar sits within easy reach of several neighboring areas we also work, and the same subtropical conditions apply across them. If you’re just outside the city line, we can help. We cover Pinewood, FL, Gladeview, FL, North Miami, FL, Miami Shores, FL, and the surrounding communities. Call us to confirm your address before you book.
Serving Miramar, FL – Our Local Coverage Area
We serve Miramar and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Miramar
Dispatch is Sunday through Friday, 7am to 7pm, and we do same-day service when the schedule allows. We won’t promise a time we can’t hold. Call (866) 942-9444 and we’ll confirm the earliest opening.
Some structural and exterior work can require a city permit, and your HOA may have rules on what’s visible from the street. Confirm with your HOA and the city before scheduling. We’ll tell you what the job involves so you can ask the right questions.
We cover Miramar along with the nearby cities listed above. If you’re near the city line, call (866) 942-9444 to confirm coverage and schedule an estimate. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miramar Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Gilbert Morales"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Stephanie Thompson"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Eric Tran