Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Miramar Homeowners
A wood-burning fireplace that hasn’t been swept in a while is a fire waiting on the right evening. Creosote builds up in layers that you can’t see from the hearth, and a blocked or glazed flue changes how smoke and carbon monoxide leave your home. We handle that problem in Miramar with a real sweep, a documented inspection, and repair work when it’s needed. Our technicians have up to 11 years of experience, and we show you what we find with a camera before any work begins. Chimney Sweep Miramar runs sweeps and inspections on a booked schedule, with same-day openings available. Call Chimney Sweep Miramar at (866) 942-9444 for an exact quote. Estimates are free.
Chimney Sweep Services
Chimney Sweep Services in Miramar cover the full job: a manual and rotary sweep of the flue, a visual and camera inspection of the firebox and chimney, and a written report on what we found. You need this when you’ve burned a full season without a cleaning, when you’re buying a home with a fireplace, or when smoke backs into the room. We don’t subcontract or refer out. Sweep, inspection, and repair all happen in one visit with one crew. A standard sweep in Miramar typically runs $180 to $340 depending on how much creosote has built up and how accessible the flue is. The written estimate sets the final price.
Rotary and Manual Sweeping
We use both methods because glazed creosote won’t yield to a brush alone. Rotary sweeping with the right head breaks up the hard, tar-like stage before it becomes a chimney fire risk. Manual brushing finishes the job and confirms the flue walls are clean from crown to smoke chamber.

What Gets Swept
Every sweep covers the firebox, smoke chamber, smoke shelf, damper, and flue. The smoke chamber is the part most cheap sweeps skip, and it’s where a lot of creosote hides. We clean it because the inspection is only useful if the surfaces behind it are actually visible.

Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning is the deeper service for a chimney that’s gone well past a routine brushing. When creosote reaches the glazed stage or has built up in the smoke chamber and flue offsets, a standard sweep won’t remove it safely. We stage the cleaning, use the right tools for each stage, and photograph the flue before and after so you can see the difference. Chimney cleaning in Miramar typically runs $220 to $450 depending on severity and flue length. You’ll know the number before we start. If the cleaning turns up damaged flue tiles or cracked mortar, the fix is quoted separately, not folded into the cleaning.
Creosote Stages and What They Mean
Creosote moves from a dusty first stage to a flaky second stage to a hard, glazed third. Third-stage creosote conducts heat into the chimney structure and is the main driver of chimney fires. We identify the stage during the camera inspection and clean accordingly.
Debris and Nest Removal
An uncapped flue lets in birds, squirrels, and leaves. We remove the debris, check that the smoke path is clear, and fit a cap from Gelco or Famco so it doesn’t happen again. A capped flue also keeps rain out, which protects the mortar from slow water damage.
Fireplace Cleaning
Fireplace Cleaning is the work on the firebox side, not just the flue. Ash, soot, and stubborn deposits collect on the firebox walls, the damper, and the hearth, and over time they eat into the mortar joints. We vacuum with HEPA filtration, scrub the firebox surfaces, and clear the damper so it opens and closes cleanly. Fireplace cleaning in Miramar typically runs $150 to $300 depending on firebox size and how much soot has bonded to the masonry. It’s usually paired with a sweep, and we’ll tell you honestly if your firebox only needs the sweep.
Damper and Hearth Care
The damper is the part that fails quietly. A damper that sticks open wastes heat up the flue; one that won’t open fully forces smoke into the room. We check the full range of motion and clear soot from the pivot and frame as part of the cleaning.
When Soot Means Something More
Heavy, oily soot on the firebox walls often points to a draft problem or burning unseasoned wood. If the pattern looks wrong, we note it in the report and explain what’s causing it. That’s a conversation, not an automatic upcharge.
Chimney Services
Chimney Services from Chimney Sweep Miramar span three things only: sweeping, inspection, and repair. We don’t do dryer vents, HVAC, or fireplace sales, so when we recommend work it’s because the chimney needs it. Services make sense as a package when you’re moving into a Miramar home with an unknown chimney history, or when a sweep turns up a problem that needs a repair quote in the same visit. Including the inspection with the sweep, a combined service typically runs $280 to $520 depending on findings. Repair work using HeatShield ceramic resurfacing or an Olympia Chimney liner is quoted separately after you’ve seen the camera footage.
One Crew, One Visit
Because we handle sweep, inspection, and repair, you’re not coordinating a sweeper and a mason on separate days. That matters when the inspection finds something and the repair can be scheduled without starting over. It also means the person recommending the repair is the person who saw the flue.

Repair Options We Actually Install
For flue resurfacing we use HeatShield, a ceramic system most general contractors have never applied. For relining we install DuraFlex and Olympia Chimney liner systems. Caps and venting come from Gelco and Famco.
Chimney Sweep Certified
Chimney Sweep Certified means the person in your home is trained on the inspection standards that govern this trade, not just handed a brush. Certification matters because the value of a sweep is the inspection that comes with it. A certified sweep knows what a normal flue looks like, what a hairline crack in a tile means, and when to recommend camera inspection versus a visual check. Our technicians have up to 11 years of experience and we walk you through what they find in plain language. There’s no certification surcharge. The sweep is the sweep, and the inspection is included in the estimate.
What Certification Covers
Certified work means following the standards for sweeping, inspecting, and evaluating the chimney and venting system. It means the technician documents conditions rather than guessing. You should ask any chimney company what training their technicians have before you book.
Why You Want It in Writing
Ask for the inspection findings in writing with photos. A certified inspection produces a record: what stage the creosote is at, condition of tiles and mortar, and any safety issues. You should be able to hand that report to an insurer or a future buyer.
Gas Fireplace Cleaning
Gas Fireplace Cleaning still matters even though a gas fireplace produces less creosote than wood. Dust, lint, and soot collect on the logs, burner ports, and glass, and a dirty burner can burn inefficiently or produce a smell. We clean the burner assembly, clear the ports, wipe the glass and firebox interior, and inspect the venting. Gas fireplace cleaning in Miramar typically runs $150 to $290 depending on the unit. If the inspection turns up a venting problem, we tell you and quote the repair. We don’t touch gas line connections; a licensed gas professional handles that.
Venting Is the Part That Matters
A gas appliance depends on its vent more than a wood fire does, because the byproducts are invisible. We inspect the vent path for blockages, correct termination, and any separation in the pipe joints. A blocked vent is a carbon monoxide problem, and that’s worth checking on a schedule.
Glass and Log Care
Sooty glass comes back because of incomplete combustion or an air shutter out of adjustment. Cleaning it without addressing the cause just means you’re cleaning it again next month. We clean it and note anything that points to a combustion issue.
Chimney Maintenance
Chimney Maintenance in a mild climate like Miramar is about keeping up with the burning you actually do, and catching slow wear before it turns into structural repair. Our recommendation is a sweep and inspection once a year for a wood-burning fireplace in regular use, and a check whenever you move into a new home or notice a change in how the fireplace draws. Maintenance visits cost the same as a standard sweep, typically $180 to $340, because the inspection is bundled in. The point of maintenance is that you spend the smaller number now instead of the larger one later. We’ll tell you plainly when work can safely wait.
What a Maintenance Visit Includes
We sweep the flue, inspect the firebox through the smoke chamber, check the crown and flashing from outside, and confirm the cap is secure. The camera inspection is included so you can see the interior condition. You leave with a written picture of your chimney’s health.
Why the Rainy Season Sets the Clock
South Florida’s wet season puts water on chimney crowns, flashing, and masonry, and water is the slow destroyer of mortar. A chimney that’s sound going into the rainy season handles it. One with a cracked crown or loose flashing takes on water all season. That’s why our maintenance conversation happens before the rain, not after.
Brands We Service
We work with HeatShield, the ceramic flue restoration system used for resurfacing damaged liners and protecting what’s left of older flue tiles. We know how it cures and where it performs best, which is why we use it for repair rather than patching with generic mortar. We also install DuraFlex and Olympia Chimney flexible liner systems and know where each system fits best for relining. For caps and venting, we work with the Gelco and Famco lines.
What that means practically: repair recommendations come with a material solution, not just a diagnosis and a shrug. Whether you have Gelco or any other make on your cap, whether your flue needs an Olympia Chimney liner or a HeatShield resurfacing, we can help. We recommend a product because it fits the job, and we tell you when repair can wait.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. A fireplace that smokes on every fire is pulling air wrong or has a blockage. That’s a draft problem or a partial obstruction, and both need checking before you burn again.
- Creosote visible on the flue walls. If you can see flakes or tar on the tile, the buildup is past the point a brush alone handles. Glazed creosote conducts heat into the chimney structure and raises fire risk.
- Strong, persistent odor even when you’re not burning. A smoked-in chimney or one pulling air down the flue will smell like campfire on a warm, still day. It often signals a pressure or cap problem.
- Damaged or missing cap. A missing cap lets in rain, animals, and debris. It also lets sparks land on the roof, and it’s the simplest fix on this list.
- Water stains on the ceiling near the chimney. Staining points to a flashing or crown problem, not the firebox. Water entry gets worse each rainy season, so don’t sit on it.
Our Process, Step by Step
- 1
Book the appointment. Call (866) 942-9444. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day openings are possible when the schedule allows.
- 2
Protect the room. We lay drop cloths and set up a HEPA vacuum before we touch the firebox. A sweep shouldn’t leave you cleaning the living room afterward.
- 3
Sweep the flue and firebox. Rotary and manual sweeping from the top down or through the firebox, whichever fits your chimney. We clear the smoke shelf and chamber, not just the flue.
- 4
Run the camera inspection. A camera goes up the flue so you see the tiles, joints, and any damage on a screen. We document what we find with photos.
- 5
Walk you through the findings. In plain language: what’s fine, what needs attention, and what can wait. If repair is needed, you get a written estimate with HeatShield or liner options quoted, and nothing starts until you approve it.
How Much Does Chimney Sweep Cost in Miramar?
A typical chimney sweep in Miramar runs $180 to $340 depending on creosote buildup, flue length, and how accessible the chimney is. A fireplace cleaning on the firebox side runs $150 to $300. If the chimney needs deeper cleaning for glazed creosote or debris removal, expect $220 to $450. Combined sweep and inspection service typically runs $280 to $520.
What moves the price: the stage of creosote, whether the chimney is straight or has offsets, roof access, and whether a cap or debris is in the way. What shouldn’t move it: the inspection. Camera inspection and a photo report come with the visit at no extra charge, because you can’t approve repair work you can’t see.
How to avoid overpaying is simple. Get the estimate in writing before booking, make sure the inspection is included in the price you’re quoted, and ask whether the sweep covers the smoke chamber. Cheap quotes often skip the smoke chamber and the camera, and that’s where the real problems live.
Every estimate we give is free and itemized. Nothing is recommended without camera evidence you can see for yourself, and we’ll say plainly when work can safely wait. Call (866) 942-9444 for an exact quote. Estimates are free.
Related work often comes up in the same visit. If the inspection finds damage, that’s a chimney repair conversation. If you need the full picture before buying or insuring a home, book a chimney inspection on its own.
Our Service Area Near Miramar
We cover Miramar and the surrounding communities, including Pinewood, Gladeview, Doral, North Miami, Brownsville, Miami Shores, Sweetwater, Fountainebleau, and Bay Harbor Islands. Scheduling is city-variable, and we’ll confirm timing when you book. Homeowners in Pinewood can book a chimney sweep, and Doral homeowners can arrange a sweep as well. Wherever you are in the area, the process is the same: booked appointment, camera inspection, written estimate before any work.
Serving Miramar, FL – Our Local Coverage Area
We serve Miramar and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Miramar
A chimney sweep is a professional cleaning of the flue, firebox, and smoke chamber to remove creosote, soot, and debris. It’s paired with an inspection of the chimney’s condition and venting. In Miramar, a sweep is the maintenance visit that keeps a wood-burning fireplace safe to use each season. Call (866) 942-9444 to book one.
A standard chimney sweep takes about one to one-and-a-half hours for a typical single-flue residential chimney. Heavier creosote, a dirty smoke chamber, or debris removal extends that. Complex chimneys or gas appliance venting can take longer, and we’ll give you a realistic window when you book. Call (866) 942-9444 for timing.
A chimney sweep in Miramar typically costs $180 to $340, and a deeper cleaning runs $220 to $450. Inspection and a photo report are included, so you’re not paying separately to find out what’s wrong. The written estimate sets the final price. Call (866) 942-9444 for an exact quote. Estimates are free.
Yes, we apply HeatShield ceramic resurfacing for flue restoration, and we install DuraFlex and Olympia Chimney liner systems. We also fit Gelco and Famco caps and venting. If your chimney uses a different make, we can still help. Call (866) 942-9444 to talk through your system.
Same-day openings are possible when the schedule allows, so it’s worth asking when you call. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (866) 942-9444 to check availability.
We stand behind the work we do, and any coverage on a sweep or a repair is put in writing with your estimate so you know what’s included. If something we’ve serviced isn’t acting right, call us and we’ll take a look. Call (866) 942-9444 with questions about coverage.
Clear the hearth area, move anything fragile away from the fireplace, and don’t light a fire for at least 24 hours before the appointment. Tell us about any gas appliance connected to the same chimney and any known issues like smoke backing into the room. That’s it. We handle the drop cloths and the cleanup. Call (866) 942-9444 if you’re unsure what to move.
Schedule Your Chimney Sweep Service in Miramar Today
Call (866) 942-9444 to book your chimney sweep in Miramar. Our technicians have up to 11 years of experience, we use professional-grade materials, and we show you the camera footage before recommending anything. Every visit includes the sweep, the inspection, and a written photo report. Estimates are free and there’s no obligation. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re near Pinewood, Gladeview, or Doral, the same team and the same process apply. A clean chimney is a measurable result, not a promise. Call us and see for yourself.
Written by the team at Chimney Sweep Miramar.