Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Miramar?
In Miramar, FL, a chimney cap install typically runs $180 to $450, and rebuilding or repairing a chimney crown runs $350 to $1,400 depending on how much of the crown is rebuilt. A new stainless cap with a full crown replacement together usually lands between $600 and $1,800, and the written estimate you receive before any work begins is the final price.
Those ranges reflect what the Miramar market looks like in 2026, where stucco-finished crowns, common on so many Broward County homes, need a different repair approach than a plain poured concrete top. We’ll walk through the numbers, what pushes them up or down, and what your money actually buys.
Key Takeaways
- Chimney cap installation in Miramar: typically $180 to $450.
- Crown repair: typically $350 to $850. Crown rebuild: $700 to $1,400.
- Cap and crown done together: $600 to $1,800.
- Stucco over the crown is common in Miramar and often raises repair cost, because the finish has to be matched.
- Free estimates and upfront pricing. Call (866) 942-9444 with photos of your chimney top if you can.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down line by line. Treat each as a typical estimate for Miramar, not a quote.
| Item | Typical Range | What It Covers |
|---|---|---|
| Standard stainless chimney cap (single flue) | $180 – $320 | Supply and install a stock-size cap with mesh spark screen |
| Custom-fit cap (multi-flue or oversized) | $300 – $650 | Made-to-size cap for a chimney with more than one flue |
| Crown repair (patch and reseal) | $350 – $850 | Fill cracks, re-slope the top, seal the crown edges |
| Crown rebuild (full replacement) | $700 – $1,400 | Remove the old crown, cast a new sloped crown, finish it |
| Crown rebuild with stucco finish | $900 – $1,600 | Rebuild plus stucco matched to the rest of the chimney chase |
| Crown seal (protective coating, no structural work) | $200 – $450 | Seal coat over a sound crown to slow water damage |
| Cap and crown together | $600 – $1,800 | Combined job, one visit, one estimate |
| Inspection to diagnose the crown and flue top | Free with an estimate | Look at the crown, flashing, flue tiles and cap condition |
What drives the number up? A crown that’s more than a cosmetic problem. If the top is cracked through to the flue tiles, water has usually been getting in for a while, and the repair may reach into the flue itself. We use chimney sweep Miramar equipment to inspect the flue from inside during the same job so the crown repair isn’t sitting on top of a problem it can’t see.
What drives it down? A single-flue chimney with a sound crown that only needs a seal coat, or a stock cap that fits the opening without modification. We stock Gelco and Famco caps and venting components, so a standard cap replacement usually goes on during the same visit rather than being ordered and rescheduled. That’s not a price reduction, but it saves you a second appointment.
What Affects Chimney Cap & Crown Pricing in Miramar
Six things move the price on a cap and crown job here more than anywhere else.
- Stucco over the crown. Many Miramar homes have a stucco-finished chimney chase, and the crown is often finished in stucco too. When a crown is rebuilt, that finish has to be redone and matched, which is a separate trade step and adds labor to the job.
- Year-round humidity and heavy summer rain. South Florida’s wet season puts a real load on a crown. A crown that’s cracking but still shedding water today can fail faster here than in a drier climate, so we lean toward a rebuild when the cracks run through rather than a patch that buys a season or two.
- Hurricane-season wind exposure. A cap has to be anchored against wind uplift. A stock cap screwed onto a four-sided flue with the right fasteners is the standard fix, but a tall or exposed chimney chase may need a heavier anchoring kit, and that’s a line item.
- Number of flues. A single-flue chimney takes a standard cap. A two- or three-flue chimney takes a custom-fit cap, and the price moves from the $180 to $320 band up to the $300 to $650 band.
- Roof pitch and access. A steep roof or a chimney at the far edge of a roof line takes longer to access safely. Access time is a real cost and it’s built into your estimate, not added afterward.
- Condition underneath. If the crown is failing because the flashing at the roof line has been letting water in, the flashing is part of the job. We won’t rebuild a crown over rotten flashing and call it done.
One more: whether the flue needs relining at the same time. If the crown has been cracked for a while, water has likely reached the flue tiles. That’s a bigger job, often priced separately, and we’ll say so plainly in the estimate rather than surprising you mid-repair.
How to Save on Chimney Cap & Crown
The honest answer is that most of the savings come from doing it sooner. A crown that gets a seal coat at the first sign of a hairline crack avoids the rebuild price entirely. Here’s what actually helps:
- Get the inspection before the repair. A free inspection lets you see whether you’re looking at a $350 patch or a $1,200 rebuild. We show you what we find, in plain language, before any work begins.
- Combine the cap and crown in one visit. A single trip, one estimate, one set of access costs. That’s typically $100 to $250 less than booking them separately.
- Stay with a stock cap if it fits. A custom cap is worth it when your flue configuration needs it, but not if a standard Gelco or Famco cap covers the opening properly.
- Repair before the wet season. Getting the crown sealed during the dry stretch means water isn’t already sitting behind a crack when the summer rains arrive.
- Ask about the flue while we’re up there. It costs nothing to look, and catching a flue issue at the crown stage is far cheaper than finding it after another season of water intrusion.
We give free estimates, so the inspection and the written estimate cost you nothing. Call (866) 942-9444 with your address and, if you can, a photo of the chimney top from the ground. It helps us give a tighter range before we’re on the roof.
Why Professional-Grade Materials Matter for Cap and Crown Work
A chimney cap is a small piece of metal, but it’s the part of the chimney that takes the most wind and rain. A cheap cap that corrodes or blows loose in a storm costs more in the long run than one installed properly the first time. We work with Gelco and Famco caps and venting components, and we install them ourselves. That means the cap you’re quoted is the cap that goes on, and we’re not handing off that part of the job to someone who doesn’t work on chimneys.
On the crown side, the material question is about what’s underneath. When a crown repair gets deep enough that the flue itself needs resurfacing, we use HeatShield ceramic resurfacing. It’s a product most general contractors and handymen have never applied, and it’s the material safety professionals specify for flue repair. If a crown rebuild reveals a flue problem, we can address it in the same job rather than sending you to another contractor.
We cover the full chimney service spectrum in a single call: sweeping, inspection, and structural repair, handled by one team. No coordinating three contractors. If you’ve had a general handyman quote a crown repair and a separate roofer quote the flashing, you already know why that matters. For more on what a full inspection covers in this part of Broward County, see our Miramar service pages.
Chimney Cap vs. Crown: What’s the Difference, and What Do You Actually Need?
Homeowners often ask for one and need the other. A chimney cap sits on top of the flue like a lid, keeping rain, animals, and debris out while letting smoke escape. A chimney crown is the concrete or stucco top of the chimney structure itself, sloping away from the flue so water runs off instead of soaking in. The cap protects the inside of the flue. The crown protects the chimney structure.
If you’re seeing water in the firebox, the cap is the usual culprit. If you’re seeing cracked or flaking concrete on the chimney top, a stained chimney chase, or rust streaks on the cap, the crown is the likely issue. Many Miramar homes need both, and that’s why we quote them together.
One thing we won’t do is give a step-by-step guide to climbing up and working on a chimney crown yourself. It’s a height job, the crown is often a crack-through surface, and a fall from a roof is not worth saving a few hundred dollars over. The crown diagnosis and the rebuild are jobs for trained technicians. What you can safely do from the ground is look at the chimney top with binoculars or zoom in with your phone camera to see whether the cap is rusted loose or the crown looks cracked. That photo is exactly what we want to see before we quote.
When to Repair vs. When to Rebuild the Crown
The rule we use is simple: if the crack goes through the crown, it gets rebuilt. If the crack is surface-only, it can be sealed. Here’s how the price difference plays out:
- Surface hairline cracks, no separation, no flaking: seal coat, $200 to $450.
- Cracks through the crown, water reaching the flue: patch and re-slope, $350 to $850.
- Crown separated from the flue, crumbling, or stucco flaking off: rebuild, $700 to $1,400, or up to $1,600 with stucco finish.
- Crown and flue both damaged: crown rebuild plus flue resurfacing, quoted as a combined job.
We always recommend the right repair rather than the cheapest one, because a patch over a through-crack will fail again here within a season or two. But we don’t push a rebuild when a seal coat will do, and the written estimate will say which one you’re getting and why.
How Long Does a Chimney Cap and Crown Job Take?
A cap replacement is usually an hour or two on the roof. A crown rebuild takes longer because it involves removing the old crown, forming and casting the new one, and matching the finish on a stucco chase. Most crown rebuilds in Miramar are done in a single visit, but if the crown needs a cure period before the finish goes on, the job is scheduled across two visits and we’ll tell you that upfront.
We dispatch Sunday through Friday, 7am to 7pm, and we’re closed Saturday. Same-day service is often possible for a cap replacement if the cap is in stock. A crown rebuild is scheduled. Call (866) 942-9444. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Our Chimney Service Capabilities
Cap and crown work sits alongside our two other core services: sweeping and inspection. That matters because a crown repair on a chimney that needs sweeping shouldn’t be done in two separate visits from two different companies. We handle all three.
- Chimney sweeping: removes creosote and debris from the flue so you can burn safely.
- Chimney inspection: identifies safety and code issues before they become costly structural failures or fire hazards. Our technicians have up to experience on chimney systems.
- Chimney repair: caps, crowns, flashing, flue resurfacing with HeatShield, and relining with DuraFlex and Olympia Chimney systems.
If a crown rebuild leads to a flue lining job, we use DuraFlex or Olympia liner systems so the repair recommendation comes with a material solution, not just a diagnosis. And if the flashing at the roof line needs attention, that’s part of the same estimate. You can read more about our full sweep and inspection services on our home page.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Miramar?
A standard stainless chimney cap in Miramar typically costs $180 to $320 installed. A custom-fit cap for a multi-flue chimney runs $300 to $650. The written estimate sets the final price, and we stock Gelco and Famco caps so a standard size is usually installed the same visit. Call (866) 942-9444 for an exact quote, and estimates are free.
How much does a chimney crown replacement cost in Miramar?
A full chimney crown rebuild in Miramar typically costs $700 to $1,400, and $900 to $1,600 if the crown needs a stucco finish matched to the chase. A patch-and-reseal is $350 to $850 for a crown that’s cracking but still structurally sound. Call (866) 942-9444 and we’ll tell you which repair you actually need, with a free estimate.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the crown is only surface-cracked: $350 to $850 versus $700 to $1,400 for a rebuild. But if the crack goes through to the flue, a patch will fail again in a season or two in South Florida’s rain, so the cheaper repair costs more over time. The written estimate will say which repair you need and why. Call (866) 942-9444 for a free inspection first.
Do I really need a chimney cap in Miramar, Florida?
Yes. A cap typically costs $180 to $320 and keeps rain, birds, squirrels, and debris out of the flue. Without one, water gets into the flue during the wet season and can damage the crown from the inside, leading to a crown repair that starts at $350 and goes up from there. It’s the cheapest piece of chimney protection you can buy. Call (866) 942-9444 for a free estimate.
Can you come out today for a chimney cap and crown quote?
Same-day service is often possible for a cap replacement if the cap is in stock. Crown work is usually scheduled. We dispatch Sunday through Friday, 7am to 7pm, and we’re closed Saturday. Call (866) 942-9444. We answer 24/7. A call outside dispatch hours is booked into the next opening. Free estimates, no obligation.
Pricing reflects the Miramar market as of 2026. Chimney Sweep Miramar offers free estimates – call (866) 942-9444.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Gilbert Morales"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Stephanie Thompson"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Eric Tran