Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Miramar?
A standard chimney sweep in Miramar typically costs $150 to $290 for a single flue, and most sweeps fall in that range once the technician has checked creosote levels and access. Add a Level 2 inspection and you’re usually looking at $250 to $450 for the visit. If the sweep turns up glazed creosote or a cracked flue that needs relining, repair work is priced separately, and the written estimate sets the final number before anything starts.
That much is the short answer. The longer one matters more in Miramar, because what’s inside a South Florida flue after a few seasons isn’t the same as what a sweep finds in a colder climate. Winters here are mild, so fireplaces often run fewer hours but sit idle longer, and that pattern changes how creosote forms and how much of it a flue carries. We’ll walk through the real price ranges below, what pushes a job toward the top of them, and what you can do to keep it near the bottom.
Key Takeaways
- A single-flue sweep in Miramar typically runs $150 to $290.
- A Level 2 inspection adds roughly $100 to $160 on top of a sweep.
- Glazed creosote removal costs more than a routine sweep, often $350 to $700.
- Flue relining is a separate repair, typically $2,500 to $6,000 depending on liner length and material.
- Estimates are free, and the written estimate is what sets your final price.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Every chimney is its own job, but the line items below cover what a sweep in Miramar usually involves. These are typical estimated ranges for the local market in 2026, not quotes. Your written estimate replaces every number here.
| Line Item | Typical Estimated Range |
|---|---|
| Standard sweep, single flue | $150 – $290 |
| Second flue, same visit | $90 – $160 |
| Level 1 inspection (visual) | $75 – $150 |
| Level 2 inspection (camera, video scan) | $175 – $350 |
| Sweep plus Level 2 inspection | $250 – $450 |
| Glazed (Stage 3) creosote removal | $350 – $700 |
| Flue resurfacing with HeatShield | $1,200 – $3,800 |
| Relining with DuraFlex or Olympia Chimney liner | $2,500 – $6,000 |
| Cap supply and install (Gelco, Famco) | $180 – $450 |
| Firebox or damper repair | $300 – $1,200 |
What pushes a sweep toward the top of the range? Heavy creosote, a flue with odd bends that slows the brush work, a chimney with no accessible cleanout, or a fireplace that hasn’t been cleaned in several seasons. A straightforward, well-maintained flue with decent access stays near the bottom. The same logic applies to inspection: a quick visual check of an accessible flue is the cheapest option, while a camera scan through a taller or offset flue takes longer and costs more.
The repair side of the table is where the spread gets wide, because the material matters. When we recommend HeatShield for flue resurfacing, that’s a ceramic-based system specified by chimney safety professionals around the country, and it costs more than a generic patch because it’s a real restoration, not a smear of mortar. Flue relining with a DuraFlex or Olympia Chimney liner sits higher still, but it’s the difference between a chimney that drafts correctly and one that keeps failing inspection. We quote these in writing after we’ve seen the flue, not over the phone.
What Affects Chimney Cleaning & Sweep Pricing in Miramar
Pricing in Miramar isn’t arbitrary. A handful of factors move the number, and most of them are things a technician can see within the first few minutes on the roof or at the firebox.
- Creosote level. Stage 1 creosote brushes out easily. Stage 3 glazed creosote is hard, tar-like, and has to be removed with more time and sometimes a chemical treatment, which is why it lands in the $350 to $700 range instead of a routine sweep price. Mild winters mean fireplaces here often burn intermittently, and that stop-and-start pattern can lay down creosote that a steady cold-climate burn would not.
- Number of flues. A single-flue fireplace is the cheapest job. A house with a fireplace and a separate fuel-burning appliance flue adds a second flue fee, usually $90 to $160 on the same visit.
- Inspection level. A Level 1 visual inspection is quick. A Level 2 camera inspection costs more but catches flue cracks, gaps in liner joints, and offset problems that a visual check cannot see. When we find an issue, we show you what the camera saw in plain language before any repair talk.
- Access and roofline. A flue with a cleanout door at the base and a straightforward roofline is faster to service than one that needs the technician to work around a complicated roof assembly or a cap that’s hard to remove. Time on the roof is time on the invoice.
- Chimney height and liner length. Repair pricing scales with flue height. A taller chimney needs more liner material and more labor, whether the job is HeatShield resurfacing or a DuraFlex liner install.
- Cap condition. A missing or rusted cap lets water, debris, and pests in, which is why we stock and install Gelco and Famco caps and venting components directly. A cap replacement at $180 to $450 is cheap next to the water damage a missing cap can cause over a few rainy seasons.
One factor that does not drive up the price here: cold. Miramar doesn’t have the freeze-and-thaw swing that cracks flues in northern states, so the damage pattern we see is more about moisture, debris, and long idle stretches than thermal stress. That’s also why regular sweeping matters even for a fireplace that only sees a few fires a season.
How to Save on Chimney Cleaning & Sweep
The cheapest chimney work is the routine kind, and the most expensive is the repair you didn’t see coming. A few practical moves keep you on the low end.
- Book a sweep before the problem shows up. A routine sweep at $150 to $290 catches a cracked flue or a loose cap early, when the fix is small. Wait until smoke backs into the room and you’re often looking at a relining quote instead.
- Combine services in one visit. Sweep plus Level 2 inspection in a single appointment costs less than two separate trips, and it gives you a complete picture of the flue in one go. We handle sweep, inspect, and repair together, no subcontracting out, so you’re not coordinating three contractors.
- Keep the cap in good shape. A cap that’s intact keeps rain, leaves, and animals out of the flue. That alone prevents a lot of the buildup that runs up the sweep bill.
- Burn seasoned wood. Dry, well-seasoned wood burns cleaner and lays down less creosote than green wood, which pushes you toward Stage 1 instead of Stage 3.
- Ask about the inspection level you actually need. A homeowner who sweeps annually and hasn’t changed anything usually needs a Level 1. A Level 2 camera scan is worth the extra $100 to $160 after a chimney fire, a liner change, or a move into a new house.
- Get the estimate in writing before work starts. That’s how the price is set on every job we quote, and it’s free. Call (866) 942-9444 and we’ll walk you through the number.
If you want the full picture of what we handle, the chimney sweep Miramar team covers sweeping, inspection, and repair in one call. For a look at how the services break down across the area, see our Miramar page.
FAQs – Chimney Cleaning & Sweep Cost
How much does it cost to have a chimney cleaned in Miramar?
A standard single-flue chimney sweep in Miramar typically costs $150 to $290. A second flue on the same visit adds about $90 to $160, and heavy creosote removal pushes the total toward $700. Call (866) 942-9444 for an exact quote. Estimates are free.
How often should you have your chimney swept?
Most wood-burning fireplaces in Miramar should be swept about once a year, and any fireplace that has burned a full cord of wood should be swept before the next season. A fuel-burning appliance flue should be inspected annually and swept when the technician finds buildup. The sweep fee itself is the same $150 to $290 range whether you go a few months over or a few months under.
Is it cheaper to repair or replace a chimney?
Repair is almost always the cheaper path when the structure is sound. Flue resurfacing with HeatShield typically runs $1,200 to $3,800 and can restore a flue that would otherwise need relining at $2,500 to $6,000. A full rebuild is a much larger project, so the inspection comes first to see which one you’re facing. Call (866) 942-9444 and we’ll tell you honestly which side of that line your chimney falls on.
Does chimney cleaning cost more if there’s a lot of creosote?
Yes. Stage 3 glazed creosote removal typically costs $350 to $700, compared with $150 to $290 for a routine sweep. Glazed creosote is hard to remove and needs more time, so the price reflects the extra labor rather than a penalty. It’s also a real fire hazard, which is why a technician should handle it rather than a homeowner attempting it.
Can you come today?
Same-day service is often possible in Miramar, and most routine sweeps are scheduled within a short window. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Call (866) 942-9444 and we’ll tell you the next available appointment.
Why does a Level 2 inspection cost more than a basic check?
A Level 2 inspection typically costs $175 to $350 because it uses a camera to scan the inside of the flue, which a visual Level 1 check at $75 to $150 cannot do. The camera shows joint gaps, cracks, and offsets that are invisible from the firebox or the roof. When we find something, we show you what the scan found before any work begins.
Do you handle repair as well as cleaning?
Yes. We cover sweeping, inspection, and repair together, so a problem found during a sweep is handled without bringing in another contractor. We work with HeatShield for flue resurfacing, DuraFlex and Olympia Chimney for relining, and Gelco and Famco for caps and venting, all in one call. The sweep starts at $150, and repairs are quoted in writing afterward. Call (866) 942-9444 for a free estimate.
A note on safety
A creosote fire burns hot enough to crack a flue and spread into the structure of a house, and the warning signs (glazed creosote, a damaged flue tile, a loose cap) are not things you can check by looking up from the fireplace. That’s why a trained technician does the sweep and inspection rather than a homeowner with a brush. If a flue has had a chimney fire, a Level 2 camera inspection is the right starting point before anything gets swept or repaired.
Our technicians have up to experience, and we’re glad to walk you through the estimate line by line. Whether it’s a simple sweep or a relining project, the price is set per job by the written estimate, and the estimate is free.
Ready for a real number? Call (866) 942-9444. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll schedule a time, inspect the flue, and give you a written estimate before any work starts.
Pricing reflects the Miramar market as of 2026. Chimney Sweep Miramar offers free estimates – call (866) 942-9444.
Written by the team at Chimney Sweep Miramar.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Gilbert Morales"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Stephanie Thompson"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Eric Tran