Chimney Repair in Gladeview, FL | Chimney Sweep Miramar

Chimney Repair in Gladeview - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Gladeview

If you own a home in Gladeview, there’s a good chance your “chimney” isn’t a masonry fireplace at all. It’s a metal flue, a B-vent chase, or a rooftop exhaust stack on a flat or low-pitch roof, and when it fails you need someone who understands that kind of work. We do. We handle chimney and vent repair throughout Gladeview, and we’ll tell you plainly what’s wrong before any work starts. Call (866) 942-9444. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (866) 942-9444

Why Gladeview Homeowners Call Chimney Sweep Miramar for Chimney Repair

Gladeview is a small, densely built unincorporated community in Miami-Dade, and the housing stock tells the story: mid-century concrete-block and stucco homes from roughly the 1950s through the 1970s, many with flat roofs and exposed metal flues rather than masonry chimneys. That shapes the work we do here. Most calls aren’t about soot. They’re about a corroded vent cap, a rusted stack, or a bird-nested flue after a storm.

We bring the same professional-grade materials to every Gladeview job. HeatShield ceramic resurfacing for flue repair, DuraFlex and Olympia Chimney liner systems for relining, Gelco and Famco caps and venting components for replacements. When a cap needs to come off and a new one goes on, it’s handled properly rather than patched with whatever was cheapest at the supply house.

We serve Gladeview as part of our regular service area, so scheduling is straightforward. Our technicians have up to 11 years of experience with exactly this kind of vent and flue work, and we show you what we find before we recommend anything. Sweep, inspect, and repair, handled by one team.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Liner Installation in Gladeview

Chimney Liner Installation in Gladeview usually means relining a metal flue or B-vent chase that has rusted through or lost its integrity, not lining a traditional masonry fireplace. On these mid-century concrete-block homes, the flue is often a factory-built metal stack with a limited service life, and when the inner wall corrodes, exhaust gases and moisture have a path they shouldn’t. We install DuraFlex and Olympia Chimney flexible liner systems sized to your appliance. A typical liner installation in Gladeview runs $1,800 to $4,500, with the written estimate setting the final price.

Signs Your Flue Needs Relining

Rust streaks on the exterior of the stack, a flue that won’t hold a draft, or visible corrosion at the joints all point toward a liner that’s past its useful life. Don’t wait for a gas appliance to start backdrafting before you look. A Level 2 inspection tells you exactly what’s happening inside the chase.

Choosing the Right Liner for the Appliance

A gas furnace, water heater, or range hood each needs a liner matched to its exhaust volume and temperature. Too large and the flue runs cold and drafts poorly; too small and you restrict flow. We size the liner to the appliance, not to whatever happens to be on hand.

Chimney Flashing Repair in Gladeview

Chimney Flashing Repair in Gladeview, FL, is often really penetration-and-seal work rather than traditional flashing replacement. Many of these homes have flat or low-slope roofs where the vent stack passes through a curb sealed with aging mastic, and that mastic cracks and fails over time. Water gets in during summer downpours and shows up as a ceiling stain days later. We reset and reseal the penetration, replace degraded flashing where the stack meets the roof, and check flue joints while we’re up there. Typical flashing and penetration repair in Gladeview runs $250 to $650.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 942-9444

Why Flat-Roof Penetrations Fail

Standing water, intense sun, and year-round humidity work on that seal every day of the year. The crack usually starts small and stays hidden until a heavy rain pushes water through it. By then the damage is already behind the ceiling.

Pairing Cap and Flashing Work

When a cap is already coming off, that’s the right time to address the penetration seal underneath it. Doing both together saves a second visit and makes sure the whole assembly is watertight.

Trusted Brands We Service in Gladeview

We work with an identified suite of professional-grade chimney industry brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters for Gladeview homeowners because it means the solution isn’t limited to whatever a generalist happens to carry. HeatShield ceramic resurfacing handles flue repair that a handyman wouldn’t know how to apply. DuraFlex and Olympia Chimney cover relining. Gelco and Famco caps and venting components get ordered and installed correctly. We don’t claim to keep parts stockpiled on a truck; we source the right material for your job and get it in place without cutting corners.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (866) 942-9444

Common Chimney Repair Problems We See in Gladeview Homes

  • Rusted vent caps and stacks. Salt-laden air and year-round humidity corrode metal flues and caps decades before a masonry chimney would show wear. A cap that’s rusted through lets water and debris straight into the flue.
  • Bird and insect nests in B-vent chases. After hurricane-season wind, it’s common to find a flue blocked by nesting material. That’s a real hazard for a gas appliance, since it stops exhaust from venting properly.
  • Failing mastic at roof penetrations. The seal around a flat-roof vent stack cracks with sun and moisture, and water intrusion often shows up as a ceiling stain well away from the stack itself.
  • Cracked flue joints in factory-built stacks. Metal flues on these 1950s – 1970s homes age out at the seams. A Level 2 inspection catches joint separation before it becomes a carbon monoxide problem.

Pricing for Chimney Repair in Gladeview, FL

What you’ll pay for chimney and vent repair in Gladeview depends on the scope, and we give real ranges so you can plan. Liner installation typically runs $1,800 to $4,500. Flashing and penetration repair runs $250 to $650. A cap replacement with re-sealing usually lands between $200 and $500. Larger flue or chase repair using HeatShield resurfacing can run $900 to $2,200 depending on the length and condition of the flue. Those are typical estimates for this market; the written estimate sets the final price, and the visit to look at it is free. Nothing gets recommended without evidence you can see for yourself.

We Also Serve Cities Near Gladeview

Gladeview isn’t the only place we work in this part of Miami-Dade. We also serve Pinewood, Brownsville, Miami Shores, and North Miami, and the flat-roof, metal-flue housing stock is similar across much of that area. If you’re just outside Gladeview and not sure whether we cover you, call and ask. Our chimney repair service covers the full sweep-inspect-repair range.

Serving Gladeview, FL – Our Local Coverage Area

We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Gladeview

Why Gladeview Chooses Chimney Sweep Miramar

We set the standard for chimney repair in Gladeview.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Gladeview

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Gladeview Customers Say

Trusted by homeowners across Gladeview and surrounding areas.

★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Gilbert Morales
★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Stephanie Thompson
★★★★★

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

Eric Tran

Ready for Chimney Repair in Gladeview?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Gladeview.

(866) 942-9444

Request a Free Estimate in Gladeview

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7