Chimney Company in Gladeview - One Flat Price, You See What We See

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 942-9444

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Gladeview, FL

Chimney inspection in Gladeview starts with a fact most out-of-town sweep companies get wrong: this is a vent and flue town, not a fireplace town. Gladeview’s concrete-block homes along the 33147 corridor rarely have a wood-burning fireplace, so the real work is rooftop exhaust stacks, B-vent chases, and bird-nested flues on flat and low-slope roofs. Our technicians have up to 11 years of experience reading exactly these systems. Call (866) 942-9444 for a free estimate.

Call (866) 942-9444

Why Gladeview Homes Are Different

Most of Gladeview was built between the 1950s and 1970s, in a tight grid of concrete-block and stucco single-family houses and small duplexes. Those roofs are flat or low-pitch, and the “chimney” is usually an exposed metal flue, a B-vent chase, or a soffit-mounted exhaust termination rather than a masonry stack. That changes the inspection entirely. There’s little soot to sweep and a great deal of hardware to check.

Subtropical heat and year-round humidity work on that hardware constantly. Vent caps rust, mastic seals around flat-roof penetrations dry and crack, and wind-driven rain during hurricane season finds every gap. Because fireplace use here is rare, blockages tend to come from birds, insects, and storm debris rather than creosote. When a Gladeview homeowner calls us, the story is almost always a rusted or wind-damaged vent cap, or a flue packed with nesting material after a storm. We plan inspections around that reality instead of running a fireplace checklist that doesn’t fit the house.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Gladeview Services

Two jobs come up again and again on Gladeview roofs: a sweep to clear vented flues and exhaust runs, and repair for corroded caps, rusted stacks, and leaking roof penetrations.

Chimney Sweep in Gladeview

In Gladeview, a sweep is less about scraping creosote and more about clearing what actually blocks a flue here: bird nests, insect debris, and the leaf litter that collects on a low-slope roof after a storm. We run rods and brushes through the vent run, then check the cap and the roof seal while we’re up there. Soot volume is usually light, but airflow matters just as much on a gas appliance flue as on a fireplace. If you’ve noticed a draft that’s gone weak or an exhaust smell in the house, that’s the call. Book a Chimney Sweep in Gladeview and we’ll show you what came out.

Chimney Sweep in Gladeview

Chimney Repair in Gladeview

Repair in Gladeview is mostly metal and roof work. Rusted vent caps get replaced, corroded stacks get renewed, and aging mastic around flat-roof penetrations gets cut out and resealed before the next summer downpour pushes water into the ceiling. We use Gelco and Famco caps and venting components for these replacements, which means the fix is a proper part rather than a patch. Where a flue interior has cracked or spalled, HeatShield resurfacing restores it from the inside. When a stack has failed structurally, we explain the options plainly. See Chimney Repair in Gladeview for the full list of what we handle.

Chimney Repair in Gladeview
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 942-9444

Chimney Inspection in Gladeview

Chimney inspection in Gladeview is really a vent-system inspection, and the housing stock tells you why. Mid-century concrete-block homes with flat or low-pitch roofs hide their flues inside chases and behind stucco, so problems show up as rust, water staining, or weak draft long before anyone sees a cracked flue. A proper Chimney Inspection here means getting onto the roof, opening the chase where it’s accessible, and looking at the whole run from appliance connection to cap. Our technicians have up to 11 years of experience with exactly this kind of assembly.

Chimney Flue Inspection

Signs you need it

You need a flue inspection when an exhaust smell lingers in the house, draft at the appliance has weakened, or you can see rust streaks or water staining around a rooftop stack.

What it costs in Gladeview

A flue inspection in Gladeview typically runs $125 to $275, depending on how much of the chase is accessible.

How we do it

We trace the flue from the appliance connection up through the chase to the cap, check joints and seals, and confirm the vent is clear and drafting correctly.

Level 2 Chimney Inspection

Signs you need it

A Level 2 inspection is the right call after a storm has shifted a stack or cap, after any change to the appliance or venting, or when you’re buying a Gladeview home and want the vent system documented.

What it costs in Gladeview

Expect $225 to $450 for a Level 2 inspection in Gladeview, with the upper end covering roof access and a video look inside the flue.

How we do it

We inspect every accessible part of the vent system, run a camera through the flue where the layout allows, and photograph what we find so you can see it yourself.

Chimney Fire

Signs you need it

After any chimney fire, however small it seemed, the flue needs a hands-on inspection because heat damage and cracked joints often aren’t visible from the ground.

What it costs in Gladeview

Post-fire inspection and assessment in Gladeview typically falls in the $225 to $450 range, and any repair is quoted separately in writing.

How we do it

We check the flue interior for heat damage and separation, examine the cap and roof penetration, and tell you plainly whether the vent can go back into service or needs repair first.

What Chimney Inspection Costs in Gladeview

Item Typical range in Gladeview
Flue inspection $125 – $275
Level 2 inspection with camera $225 – $450
Post-fire inspection and assessment $225 – $450

Do I really need a chimney inspection if I don’t burn wood?

Yes. In Gladeview the vent still carries exhaust from gas appliances, and a blocked or rusted flue affects that just as much. An inspection confirms the run is clear and the cap and seals are sound. Call (866) 942-9444 for an exact quote – estimates are free.

How often should a Gladeview vent system be inspected?

Once a year is a reasonable rhythm here, and after any named storm that hits the roof. Rust, wind damage, and nesting debris build up fast in this climate. Call (866) 942-9444 for an exact quote – estimates are free.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 942-9444

Brands We Service in Gladeview

We work with professional-grade chimney and venting brands, including DuraFlex and Olympia Chimney liner systems, HeatShield flue resurfacing, and Gelco and Famco caps and venting components. We don’t claim parts on hand in Gladeview; materials are specified per job and the turnaround is set in your written estimate. Browse our brands for the full list.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Company in Gladeview, FL

Service Typical range in Gladeview
Flue inspection $125 – $275
Level 2 inspection with camera $225 – $450
Post-fire inspection and assessment $225 – $450

Price in Gladeview is driven by roof access, how much of the chase can be opened, and whether the cap and roof seal need replacement alongside the inspection. Every figure here is an estimate; the written estimate we give you before any work sets the final price.

Want to talk it through?Free estimate, price agreed before work starts
Call (866) 942-9444

Neighborhoods We Serve in Gladeview

We cover the residential streets across Gladeview, from the blocks near Northwest 17th Avenue to the duplex rows further east toward Northwest 27th Avenue, and everywhere in between within the 33147 ZIP. Flat and low-slope roofs are the norm throughout, so bring us a photo of the stack if you’re not sure what you’ve got up there. Fast dispatch from 7am to 7pm handles most of the community on the same run.

  • Blocks near Northwest 17th Avenue
  • Duplex rows toward Northwest 27th Avenue
  • Side streets off Northwest 79th Street
  • Homes near the Gladeview neighborhood core

Service Area – Cities Near Gladeview

Gladeview sits in unincorporated Miami-Dade, and we cover the surrounding communities on the same basis. If you’re just outside the Gladeview line, we likely still reach you, including Pinewood, FL, Brownsville, FL, Miami Shores, FL, and North Miami, FL. The housing stock and the vent systems are similar across all of them, which means the same inspection approach carries over.

Serving Gladeview, FL – Our Local Coverage Area

We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Gladeview

Ready to get started? Free estimates in Gladeview
Call (866) 942-9444

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Gladeview Customers Say

★★★★★ 4.9 from 11+ reviews

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Gilbert Morales

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

- Stephanie Thompson

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Eric Tran

How It Works in Gladeview

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Gladeview. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7